User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 281
9.1.4
Displaying MRIB Information
To display MRIB information, use the following commands
Command Mode
Description
show ip mroute
{
dense
|
sparse
}
{
count
|
summary
}
show ip mroute
GROUP-ADDR
[
SRC-IP-ADDRESS
] {
dense
|
sparse
} {
count
|
summary
}
show ip mroute
GROUP-ADDR
[
SRC-IP-ADDRESS
]
GROUP-
ADDR
[
SRC-IP-ADDRESS
]{
dense
|
sparse
} {
count
|
summary
}
show ip mroute GROUP-
ADDR
/M {
dense
|
sparse
} {
count
|
summary
}
Enable
Global
Bridge
Displays multicast routes entries.
GROUP-ADDR: group IP address
SRC-IP-ADDRESS: source IP address
To display the contents of the MRIB VIF table, use this command.
Command Mode
Description
show ip mvif
[
IFNAME
]
Enable
Displays IP multicast interface.
9.1.5 Multicast
Time-To-Live
Threshold
Use this command to configure the time-to-live (TTL) threshold of packets being for-
warded out of an interface.
Command Mode
Description
ip multicast ttl-threshold
<0-255>
Configures the time-to-live threshold for multicast
packet
Default: 1
no ip multicast ttl-threshold
interface
Restores is as a default.
9.1.6 MRIB
Debug
Use this command to debug events in the multicast RIB.
Command Mode
Description
debug
nsm
mcast
{
all
|
fib-msg
|
mrt
|
register
|
stats
|
vif
}
Debugs event in the multicast RIB.
all : all Ipv4 multicast debugging
fib-msg: multicast FIB messages
mrt: multicast routes
register: multicast PIM register messages
stats: multicast statitics
vif: multicast interface
no debug nsm mcast
{
all
|
fib-
msg
|
mrt
|
register
|
stats
|
vif
}
Enable
Disables the debug event.
