User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 91
6.1.14
Assigning IP Address of FTP Client
Serveral IP addresses can be assigned on hiD 6615 S223/S323. But user can specify
one source IP address connecting FTP server when the switch is a client. To configure
FTP binding address as a source IP address when hiD 6615 S223/S323 as a client con-
nects to FTP server, use the following command.
Command Mode
Description
ftp bind-address A.B.C.D
Binds a source IP address for connecting to FTP
server..
no ftp bind-address
Global
Deletes FTP bind-address
Please be careful that the FTP bind-address is also applied to TFTP server’s bind-
address.
6.2 Configuration
Management
You can verify if the system configurations are correct and save them in the system. This
section contains the following functions.
•
Displaying System Configuration
•
Saving System Configuration
•
Auto-Saving
•
System Configuration File
•
Restoring Default Configuration
6.2.1
Displaying System Configuration
To display a current running configuration of the system, use the following command.
Command Mode
Description
show running-config
Shows a configuration of the system.
show running-config
{
admin-
rule
|
arp
|
bridge
|
dns
|
full
|
hostname
|
instance
|
interface
INTERFACE
I
login
|
pm
|
qos
|
rmon-alarm
|
rmon-event
|
rmon-
history
|
router
{
bgp
|
pim
|
rip
|
ospf
|
vrrp
} |
rule
|
snmp
|
syslog
|
time-out
|
time-zone
|
time-out
}
Shows a configuration of the system with the specific
option.
show running-config router
{bgp | ospf | pim | rip | vrrp}
All
Shows only the configuration that corresponds to each
option.
i
