User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 353
To configure the period of finding, use the following command.
Command Mode
Description
timers spf
SPF-DELAY SPF-
HOLD
Router
Configures the period of finding in the unit of second.
SPF-DELAY: 0-2147483647 (default: 5)
SPF-HOLD: 0-2147483647 (default: 10)
To release the configuration, use the following command.
Command Mode
Description
no timers spf
Router
Release the configuration.
10.2.12
External Routes to OSPF Network
If other routing protocol redistribute into OSPF network, these routes become OSPF ex-
ternal routes. Other routing protocols are RIP and BGP. And static route, connected route,
kernel route are also external route. Those routing information can distribute into OSPF
network.
There are 4 kinds of additional configuration about external routes to OSPF network.
metric
is configures Metric value of the default route,
metric-type
is for type of finding
the path.
metric-type 1
uses internal path cost with external path cost as a cost, metric
type 2 always uses external cost value.
route-map
is transmission of specific routing in-
formation to assigned route which has MAP-NAME, and,
tag
is using the assign tag num-
ber on the specific MAP-NAME.
Those 4 kinds of additional configuration can be selected more than 2 options without or-
der, and it applies to consistent across all external routes in an attached network.
The following is explaining 4 options of command:
•
metric
<0-16777214>
•
metric-type
<1-2>
•
route-map
MAP-NAME
•
tag
<0-4294967295>
To configure the external route transmission, use the following command.
Command Mode
Description
redistribute
{
bgp
|
connected
|
kernel
|
rip
|
static
}
metric
<0-
16777214>
redistribute
{
bgp
|
connected
|
kernel
|
rip
|
static
}
metric-type
<1-2>
redistribute
{
bgp
|
connected
|
kernel
|
rip
|
static
}
route-map
MAP-NAME
redistribute
{
bgp
|
connected
|
kernel
|
rip
|
static
}
tag
<0-
4294967295>
Router
Configures the external route transmission.
