Siemens S223 User Manual Download

Page: 268 / 381

UMN:CLI User Manual

SURPASS hiD 6615 S223/S323 R1.5

268 A50010-Y3-C150-2-7619

8.9.3.2 RM

Node

To configure RM Node, use the following command.

Command Mode

Description

erp rmnode

DOMAIN-ID

Configures RM node of ERP node mode.

no erp rmnode

DOMAIN-ID

Bridge

Configures ERP node mode as normal node.

8.9.3.3

Port of ERP domain

To configure Primary Port and Secondary port of RM Node, use the following command.

Command Mode

Description

erp port

DOMAIN-ID

primary

PORT

secondary PORT

Bridge

Configures ports of ERP domain

Primary port and secondary port should be different.

8.9.3.4 Protected

VLAN

To configure Protected VLAN of ERP domain, use the following command.

Command Mode

Description

erp protections

DOMAIN-ID VID

Bridge

Configures protected VLAN of ERP domain
VID: VLAN ID

To delete the configured Protected VLAN, use the following command.

Command Mode

Description

no erp protections

VID

Bridge

Deletes protected VLAN of ERP domain.
VID: VLAN ID

8.9.3.5 Protected

Activation

To configure ERP Protected Activation, use the following command.

Command Mode

Description

erp activation

DOMAIN-ID

Bridge

Configures

ERP

Protected

Activation.

To disable ERP Protected Activation, use the following command

Command Mode

Description

no erp activation

DOMAIN-ID

Bridge

Disables

ERP

Protected Activation.

Summary of Contents for S223






























































































































































































































































































































































































Search results

Summary of Contents for S223

Reviews:

Related manuals for S223

Brands by name

Popular brands

Siemens S223, User Manual

Search results

Summary of Contents for S223

Reviews:

Related manuals for S223

Brands by name

Popular brands