Web Interface
217
Alphabetic Reference
This glossary provides basic information required for performing configura-
tion tasks on the optiPoint 410/420 economy/economy plus/
standard S V7.0.
• The section "Alphabetic Reference" explains terms found in the menus
in alphabetic order.
• Clicking the icons will bring you to the relevant function descriptions:
–
Using the icons on the optiPoint 410/420 economy/economy plus/
standard S V7.0
–
Using the icons via the web interface
Append Codes
Append codes are control functions that are accepted at any position with-
in the repertory dialing sequence.
The following options are available for selection:
page 213 page 119
Audible secure call indicator
If the function is activated, you hear an acoustic signal if the voice connec-
tion is not secure.
page 216
page 112
Auto-Dial Timer
Timeslot (in seconds) between the last digit input and the start of the dial-
ing procedure.
• Minimum value: 1
• Maximum value: 8
• Default value: 6
page 215 page 98
Call Forwarding Locked Destination
Enter the destination to which calls are to be forwarded when the tele-
phone is locked (see also
page 221).
page 215 page 115
Function
Status Indication
OK
Any characters following this function are sent im-
mediately as DTMF signals after the call has been
answered.
Clear
Clear the current call at this point.
Consult
Establish a consultation call at this point.
Pause
Any characters following this function are sent af-
ter three seconds.