Siemens HiPath 8000 optiPoint 410 User Manual Download Page 25

Page: 25 / 242

Operating the Telephone with the Display

Step by Step

Answering a Call Without the Headset
(Speakerphone Mode)

The telephone rings. The caller is displayed on the

screen.

Confirm

Press key. LED lights up.

Speakerphone mode.

Adjust volume. To raise or lower the volume, keep

pressing the keys until the desired volume is set.

Notes on speakerphone mode:

• Tell the other party that you are using speakerphone

mode.

• The speakerphone works bests at a low receiving

volume.

• The ideal distance between the user and the tele-

phone set in speakerphone mode is about 50 cm

(approx. 20 inches).

• If the other party cannot hear you, please check with

your service personnel whether your microphone

was deactivated via the configuration settings.

You can’t use this function with optiPoint 410/

420 economy/economy plus

Answer call?

Loudspeaker

On multiline telephones, the line being signalled is

automatically selected when you lift the handset.

If more than one line is alerting, you are connected

to the line that has been ringing the longest.

If you want to override the automatic selection,

press the applicable line key before you go off-

hook.

During secure voice transmission a lock symbol

is displayed on the phone (also see page 23)

Summary of Contents for HiPath 8000 optiPoint 410



















































































































































































































































Search results

Summary of Contents for HiPath 8000 optiPoint 410

Reviews:

Related manuals for HiPath 8000 optiPoint 410

Brands by name

Popular brands

Siemens HiPath 8000 optiPoint 410, User Manual

Search results

Summary of Contents for HiPath 8000 optiPoint 410

Reviews:

Related manuals for HiPath 8000 optiPoint 410

Brands by name

Popular brands