Siemens HiPath 8000 optiPoint 410 User Manual Download Page 205

Page: 205 / 242

Step by Step

Operating the Telephone with the optiPoint display module

206

Setup Menu in the Display Module

You can also call up the Setup menu ( page 90) in the

optiPoint display module. To do this, use the keypad on

the telephone.

In idle mode open

Setup

in the menu to call up the tele-

phone’s Setup menu. You will see the following view:

Use the keypad on the telephone to enter the letters

and the keys

to scroll and confirm.

Call Control

Mon 07/03/05 11:34AM

+44 123456 78910

Call Log

Redial Last No.

Group Pickup

Forward Calls

Do not disturb

Cancel Callbacks

Ringer on

Setup

Contacts

Setup

Setup:

2=Configuration?

Summary of Contents for HiPath 8000 optiPoint 410



















































































































































































































































Search results

Summary of Contents for HiPath 8000 optiPoint 410

Reviews:

Related manuals for HiPath 8000 optiPoint 410

Brands by name

Popular brands

Siemens HiPath 8000 optiPoint 410, User Manual

Search results

Summary of Contents for HiPath 8000 optiPoint 410

Reviews:

Related manuals for HiPath 8000 optiPoint 410

Brands by name

Popular brands