Siemens HiPath 8000 optiPoint 410 User Manual Download

Page: 45 / 242

Operating the Telephone with the Display

Step by Step

Activate call forwarding

Select and confirm. "Not active" is displayed.

Confirm (or select and confirm "2=On no reply" or

"3=On busy").

Select and confirm. Forwarding is "Active".

Programming Call Forwarding

If you select a forwarding function that is not pro-

grammed, the "New/change target" menu option auto-

matically appears, which permits you to specify a desti-

nation address. Currently active or not active forwards

can also have their destination addresses changed. To

do this you must change default menu option "Switch

on" or "Switch off" to "New/change target" using the ar-

row keys. These scenarios are described below. Note

the "Cancel" function key can be used at any time to re-

vert to the previous level.

Specify and activate forwarding destination

Select and confirm. "Not active" is displayed.

Confirm (or select and confirm "2=On no reply" or

"3=On busy"). "Not set" is displayed.

Confirm

Confirm "1=Use keypad" to enter numeric values only

(or select and confirm "2=Use editor" to enter alphanu-

meric text).

Enter the destination telephone number. Delete exist-

ing numbers by means of the

key, if necessary.

If complete, confirm the entry. The forward is set and

active.

03=Forward?

1=Unconditional?

3=Switch on?

03=Forward?

1=Unconditional?

1=New/change target?

1=Use keypad?

Complete?

If unconditional call deflection is active in the idle

state, the fourth line of the display toggles be-

tween Menu and the programmed forwarding

destination, such as ">01928005".

Summary of Contents for HiPath 8000 optiPoint 410



















































































































































































































































Search results

Summary of Contents for HiPath 8000 optiPoint 410

Reviews:

Related manuals for HiPath 8000 optiPoint 410

Brands by name

Popular brands

Siemens HiPath 8000 optiPoint 410, User Manual

Search results

Summary of Contents for HiPath 8000 optiPoint 410

Reviews:

Related manuals for HiPath 8000 optiPoint 410

Brands by name

Popular brands