manualshive.com logo in svg

Siemens HiPath 8000 optiPoint 410, User Manual, Page: 95 / 242

Share
Download
Siemens HiPath 8000 optiPoint 410 User Manual Download Page 95

Customizing the Telephone

95

Step by Step

Call Waiting

You can use this option to enable call waiting during an 

active call.

Prerequisite

: You are in the "Configuration" menu 

 page 91.

>

 

 

:

Select and confirm. 

 

:

Confirm. Second call is permitted.

or

 

:

Confirm. Second caller hears busy signal.

The new setting is displayed.

Call Transfer

Use this menu option to activate/deactivate the feature 

for deflecting a current call to another party.

Prerequisite

: You are in the "Configuration" menu 

 page 91.

>

 

 

:

Select and confirm.

 

:

Confirm. Call can be transferred.

or

 

:

Confirm. Call transfer not permitted.

The new setting is displayed.

This menu option is only available if it has been 

activated by the administrator.

08=Call waiting?

>

Switch on?

>

Switch off?

>

This menu option is only available if it has been 

activated by the administrator.

09=Call transfer?

>

Switch on?

>

Switch off?

>

Summary of Contents for HiPath 8000 optiPoint 410



















































































































































































































































Reviews:

No comments