Siemens HiPath 8000 optiPoint 410 User Manual Download Page 3

Page: 3 / 242

Safety Precautions

Important Notes

The information provided in this document contains merely general descriptions or charac-

teristics of performance which in case of actual use do not always apply as described or

which may change as a result of further development of the products.

An obligation to provide the respective characteristics shall only exist if expressly agreed

in the terms of contract.

The trademarks used are owned by Siemens Enterprise Communications GmbH & Co. KG

or their respective owners.

Labels

Never operate the telephone in an environment where there is a risk of ex-

plosion.

Only use Siemens accessories. The use of other manufacturers’ accesso-

ries may be dangerous and will render the warranty and approval null and

void.

Never open the telephone set or an add-on unit. If any problems arise, con-

tact your service personnel.

The device conforms to the EU guideline 1999/5/EG, as attested by the CE

mark.

This device has been manufactured in accordance with our certified environ-

mental management system (ISO 14001). This process ensures that energy

consumption and the use of primary raw materials are kept to a minimum,

thus reducing waste production.

All electrical and electronic products should be disposed of separately from

the municipal waste stream via designated collection facilities appointed by

the government or the local authorities.

The correct disposal and separate collection of your old appliance will help

prevent potential negative consequences for the environment and human

health. It is a precondition for reuse and recycling of used electrical and elec-

tronic equipment.

For more detailed information about disposal of your old appliance, please

contact your city office, waste disposal service, the shop where you

purchased the product or your sales representative. The statements quoted

above are only fully valid for equipment which is installed and sold in the

countries of the European Union and is covered by the directive 2002/96/EC.

Countries outside the European Union may have other regulations regarding

the disposal of electrical and electronic equipment.

Summary of Contents for HiPath 8000 optiPoint 410



















































































































































































































































Search results

Summary of Contents for HiPath 8000 optiPoint 410

Reviews:

Related manuals for HiPath 8000 optiPoint 410

Brands by name

Popular brands

Siemens HiPath 8000 optiPoint 410, User Manual

Search results

Summary of Contents for HiPath 8000 optiPoint 410

Reviews:

Related manuals for HiPath 8000 optiPoint 410

Brands by name

Popular brands