Siemens HiPath 8000 optiPoint 410 User Manual Download Page 58

Page: 58 / 242

Step by Step

Operating the Telephone with the Display

Deactivating the Ringer

If you do not want to be disturbed by an incoming call

ringing, you can deactivate the ringer.

Prerequisite

: A function key must be configured (see

page 117).

Press the Ringer off key.

The LED is on.

If there’s an incoming call, the ringer sounds one time

and then remains mute.

The Ringer off LED blinks.

To deactivate the function, press the "Ringer off" key

again.

The LED goes out.

Activating Do Not Disturb

Another way of avoiding disruptive incoming calls is to

activate the Do Not Disturb function. When this func-

tion is activated, your telephone will not ring for incom-

ing calls. The caller will receive busy treatment (tone or

announcement), depending on the system setup.

Prerequisite

: Do Not Disturb must be permitted, other-

wise the menu option will not be available (see

page 101).

Activating/Deactivating Do Not Disturb

Select and confirm.

Confirm. The new setting is displayed.

If the word "or" is blinking in the idle display, the mes-

sage "Do not Disturb - set" is displayed.

Ringer off

This setting remains in effect as long as the LED

is on.

Ringer off

If you have a multiline telephone, this function is

only available for the prime line.

04=Do Not Disturb?

Switch on?

Switch off?

Summary of Contents for HiPath 8000 optiPoint 410



















































































































































































































































Search results

Summary of Contents for HiPath 8000 optiPoint 410

Reviews:

Related manuals for HiPath 8000 optiPoint 410

Brands by name

Popular brands

Siemens HiPath 8000 optiPoint 410, User Manual

Search results

Summary of Contents for HiPath 8000 optiPoint 410

Reviews:

Related manuals for HiPath 8000 optiPoint 410

Brands by name

Popular brands