Siemens HiPath 8000 optiPoint 410 User Manual Download Page 43

Page: 43 / 242

Operating the Telephone with the Display

Step by Step

Call Forwarding

To manage your telephone, you can have calls forward-

ed to another telephone.

Prerequisite

: The call forwarding function is active

page 94.

Three types of call forwarding can be programmed us-

ing the Forward menu:

• Unconditional

• On no reply

• On busy

Due to its immediate effect, the unconditional type of

forwarding has a higher priority than the no reply and

busy types. Calls that are being actively forwarded are

displayed in the status list ( page 91). Please note

that a key which has been assigned the call forwarding

function provides a shortcut to the number to which

calls are currently being forwarded.

If the administrator has activated the function for log-

ging forwarded calls, these calls will be listed in the

"Forwarded calls" log ( page 40).

The HiPath 8000 also provides switch-based call

forwarding features. These features are de-

scribed on page 72. However:

• You should not use these phone-based

call forwarding features together with the

HiPath 8000 call forwarding features.

• Using the phone-based call forwarding fea-

tures gives you greater control over your call

forwarding.

Summary of Contents for HiPath 8000 optiPoint 410



















































































































































































































































Search results

Summary of Contents for HiPath 8000 optiPoint 410

Reviews:

Related manuals for HiPath 8000 optiPoint 410

Brands by name

Popular brands

Siemens HiPath 8000 optiPoint 410, User Manual

Search results

Summary of Contents for HiPath 8000 optiPoint 410

Reviews:

Related manuals for HiPath 8000 optiPoint 410

Brands by name

Popular brands