Siemens HiPath 8000 optiPoint 410 User Manual Download

Page: 90 / 242

Step by Step

Customizing the Telephone

This chapter describes the settings for the optiPoint

410/420 economy/economy plus/standard S V7.0 - in-

cluding the language used for menu guidance, date and

time, dialing mode and audio settings for instance.

Accessing the Setup Menu

All settings are performed in the "Setup" menu, which

you can access as follows:

Prerequisite

: The idle menu is displayed.

Select and confirm.

You will find an overview of the options

here

from

page 229.

Select and confirm to quit the menu.

As soon as you lift the handset, you exit the "05=Setup"

menu automatically.

The individual menus are described in the following sec-

tions:

• Settings page 91

• Configuration page 91

• Local Function page 113

• Assigning Function Keys page 117

• Audio Settings page 124

• Restarting the Telephone

05=Setup?

2=Configuration?

0=End?

All menus and menu items are preceded by a

number. If you use the menu structure given at

the end of this chapter, you can navigate within

the menus faster by entering the numbers.

The sub-menus "2=Configuration" and "3=Local

functions" in the "05=Setup" menu can be pro-

tected by a user password page 114.

Summary of Contents for HiPath 8000 optiPoint 410



















































































































































































































































Search results

Summary of Contents for HiPath 8000 optiPoint 410

Reviews:

Related manuals for HiPath 8000 optiPoint 410

Brands by name

Popular brands

Siemens HiPath 8000 optiPoint 410, User Manual

Search results

Summary of Contents for HiPath 8000 optiPoint 410

Reviews:

Related manuals for HiPath 8000 optiPoint 410

Brands by name

Popular brands