Siemens HiPath 8000 optiPoint 410 User Manual Download Page 93

Page: 93 / 242

Customizing the Telephone

Step by Step

Setting the Date and Time

After the display format is selected, the date field ap-

pears.

The field to be edited can be changed by using the

and

keys to scroll to the next or previous field.

Enter the proper digits using the keypad.

Confirm the entered date.

Press the Stop/Escape key to return to the "Configura-

tion" menu without changing the setting.

Call Deflection

This option permits you to configure call deflection to a

destination. You can also predefine a destination for the

deflection (see page 106).

Prerequisite

: You are in the "Configuration" menu

page 91.

Select and confirm.

Confirm. Calls can be deflected.

Confirm. Call deflection is not available in this menu.

The new setting is displayed.

Day:20 Month:09 Year:05?>

Hour:15 Minute:10?

If the date and time is invalid, the phone beeps

and the cursor returns to the first item in the en-

try field when you attempt to confirm the entry.

Cancel/Rel.

04=Call deflection?

Switch on?

Switch off?

Summary of Contents for HiPath 8000 optiPoint 410



















































































































































































































































Search results

Summary of Contents for HiPath 8000 optiPoint 410

Reviews:

Related manuals for HiPath 8000 optiPoint 410

Brands by name

Popular brands

Siemens HiPath 8000 optiPoint 410, User Manual

Search results

Summary of Contents for HiPath 8000 optiPoint 410

Reviews:

Related manuals for HiPath 8000 optiPoint 410

Brands by name

Popular brands