Siemens HiPath 8000 optiPoint 410 User Manual Download

Page: 71 / 242

HiPath 8000 Functions

Step by Step

HiPath 8000 Functions

The HiPath 8000 system supports a number of func-

tions, which you can activate or deactivate via the tele-

phone. With a multiline telephone each function relates

to the prime line. The functions can also be invoked via

optiPoint display module call control page 149

Toggle Key

To invoke the functions "make line busy" and "stop hunt"

one of the function keys can be defined and program-

med as feature toggle key (see also page 83)

By pressing the function key, you can activate or deac-

tivate the corresponding HiPath 8000 function on the

server.

You can only assign function keys on the first level be-

cause the LED associated with the key is used to indi-

cate the function’s status as either

(LED on) or

Off

(LED off). The LED indicates the status of a function on

the server. It can therefore change regardless of wheth-

er a function key is pressed or not.

If a function key is pressed, the display will indicate the

resultant status of the function.

Example:

Switching between "Line busy" and "Line free".

Precondition

: Your service personnel has set up a key

for the function "Busy" (switch line "Busy" for the hunt

group).

Press the toggle key.

The message "Line busy" appears in the display and the

LED lights up.

Press the toggle key again to switch back to "Line free".

The message "Line free" appears in the display and the

LED goes out.

make line busy

Summary of Contents for HiPath 8000 optiPoint 410



















































































































































































































































Search results

Summary of Contents for HiPath 8000 optiPoint 410

Reviews:

Related manuals for HiPath 8000 optiPoint 410

Brands by name

Popular brands

Siemens HiPath 8000 optiPoint 410, User Manual

Search results

Summary of Contents for HiPath 8000 optiPoint 410

Reviews:

Related manuals for HiPath 8000 optiPoint 410

Brands by name

Popular brands