Siemens HiPath 8000 optiPoint 410 User Manual Download

Page: 12 / 242

General Information

About These Operating Instructions

These operating instructions will help you get to know the optiPoint 410/

420 economy/economy plus/standard S V7.0 and to use its functions. The

instructions contain important information for safe and proper operation of

the optiPoint 410/420 economy/economy plus/standard S V7.0. Follow

them carefully to avoid improper operation and get the most out of your

multi-function telephone in a network environment.

Everybody involved in installing, operating or programming the

optiPoint 410/420 economy/economy plus/standard S V7.0 must read

these operating instructions.

The layout of this operating manual is extremely user-friendly. You will be

guided through operation of the optiPoint 410/420 economy/economy

plus/standard S V7.0 step by step – starting with a description of simple

basic functions, through configuration of all operating parameters to a de-

scription of the additional features. Administrative tasks are described in a

separate manual. The quick reference guide is meant to give you quick and

reliable explanations regarding frequently used functions.

Intended Use

The optiPoint 410/420 economy/economy plus/standard S V7.0 telephone

is a desktop unit designed for voice transmission and for connection to a

LAN. Any other use is regarded as not prescribed.

Product Identification

The characteristics of the telephone – precise product name and serial

number – are displayed on the nameplate on the underside of the tele-

phone. Please have these at hand when you contact our service depart-

ment regarding problems or defects on the unit itself.

For your own protection, please read the section dealing with safety.

Follow the safety instructions carefully in order to avoid endangering

yourself or other persons and to prevent damage to the unit.

Summary of Contents for HiPath 8000 optiPoint 410



















































































































































































































































Search results

Summary of Contents for HiPath 8000 optiPoint 410

Reviews:

Related manuals for HiPath 8000 optiPoint 410

Brands by name

Popular brands

Siemens HiPath 8000 optiPoint 410, User Manual

Search results

Summary of Contents for HiPath 8000 optiPoint 410

Reviews:

Related manuals for HiPath 8000 optiPoint 410

Brands by name

Popular brands