Uses GSM/GPRS
national network
Affordable full data wireless
alarm communicator
FULL DATA
StarLink Full Data
SL-1FD-T
Full Data Wireless Alarm Communicator with
Telephone Line Connection & Monitoring
Full
data contact ID or 4/2 communications.
Use for primary or backup alarm reporting.
Saves
money and duplicate-reporting when used as a backup
alarm communicator, too. Connects to telephone line and
monitors it; so radio only reports alarm data via GPRS/
GSM wireless network when telco can’t.
Featuring:
• Full event reporting
• Universally compatible to support full data of all alarm panel brands using
Contact ID and 4/2 formats
• Uses GPRS data channel of GSM network for affordable, dependable,
high-speed alarm communications supported by an extensive nationwide
network.
• Connects to and monitors phone line so when used as a backup alarm
communicator SL-1FD-T only transmits alarm events wirelessly when the
telco fails – saving money, reporting fees, eliminating duplicate reporting
confusion, etc.
• May also be used as a primary alarm communicator, always reporting
wirelessly via GSM network.
• Easy to activate and program via telephone voice prompts or online at
www.napcosecurity.com or www.napcostarlink.net ; automatic dialer
capture for minimal programming. No costly programmer is required.
• SIM card included
• Self-monitoring of unit’s performance for reliability
• Universally transmits alarm reports to any central
station supporting standard all CS formats (contact
ID or 4/2), without requiring any additional CS
equipment
• Durable aluminum housing (Optionally
accommodates 1/2” EMT for wiring protection
and standard 3/8” recessed magnetic contact for
supervised tamper.)
• EMI-/RFI-shielded electronics ensures dependability
• Automatic signal-strength indicator on power up for
dependable installation peace of mind (Visual LED
indicator strength scale 1 to 5)
• Powerful transmission; Maximum FCC-allowable RF
output
FULL DATA
Note:
Radio activation requires one-year
GPRS subscription.
Sold separately
