Siemens GIGASET C470 IP User Manual Download Page 27

Page: 27 / 219

ECO DECT: Reducing the power consumption and transmission power of the base station

Belt clip and headset

Gigaset C470-C475 IP / GBR / A31008-M1916-L101-1-7619 / starting.fm / 7.2.08

ion 2.

08.0

1.20

Connection socket for headset

You can connect various headset types (with 2.5 mm jack connector), including HAMA

Plantronics M40, MX100 and MX150.
A compatibility list of tested headsets is available on the Internet at:
www.plantronics.com/productfinder

ECO DECT: Reducing the power consumption and
transmission power of the base station

The base station of your phone is an ECO DECT base station, this means that:

The base station uses less power because it is equipped with a power-saving mains

adaptor.

The reduction of the handset's transmission power is dependent on the handset's prox-

imity to the base station.

The base station can also be switched to eco mode. Eco mode reduces the transmission

power and power consumption of the base station. This can be set on your handset.

Activating/deactivating eco mode

Precondition:

Repeater support must be deactivated.

Settings

Base

Add. Features

Eco Mode

Select and press

§OK§

(

= on).

Eco mode enables an additional reduction in the transmission power of the

Gigaset C47H

handset. If, with eco mode activated, the transmission power of both the base station and

the handset is reduced, the

icon is shown in the top line of the display.

Please note:

– Activating eco mode reduces the range of the base station.
– Eco mode and repeater support cancel each other out, i.e. both functions cannot be used at the

same time.

‰

Summary of Contents for GIGASET C470 IP




























































































































































































































Search results

Summary of Contents for GIGASET C470 IP

Reviews:

Related manuals for GIGASET C470 IP

Brands by name

Popular brands

Siemens GIGASET C470 IP, User Manual

Search results

Summary of Contents for GIGASET C470 IP

Reviews:

Related manuals for GIGASET C470 IP

Brands by name

Popular brands