161
Web configurator – configuring the telephone via a PC
Activating/deactivating the automatic version check
Gigaset C470-C475 IP / GBR / A31008-M1916-L101-1-7619 / web_server.fm / 7.2.08
Ve
rs
ion 2.
1,
08.0
1.20
07
Activating/deactivating the automatic version check
When the version check is activated, the phone checks on a daily basis whether the Sie-
mens configuration server is carrying a new version of the phone firmware or of the file
with the general settings for your VoIP provider.
If a new version is available, a notification is sent to the handset and the message key
flashes. You can then carry out an automatic update of the firmware (page 117) or of the
VoIP provider settings (page 119).
¤
Open the following Web page:
Settings
¢
Miscellaneous
.
¤
Click
Yes
next to
Automatic check for software/profile updates
to activate the automatic ver-
sion check.
Click
No
if you do not want a version check to be carried out.
¤
Click
Set
to save the changes.
Copy date and time from time server
The date and time are shown in the idle display of registered handsets. They are important,
for example, for stating the correct time in the calls list and for the "alarm clock" function.
There are two methods for updating the time and date on your base station: manually with
one of the registered handsets (page 13) or automatically by synchronisation with a time
server on the Internet.
Activate/deactivate synchronisation with a time server as follows:
¤
Open the following Web page:
Settings
¢
Miscellaneous
.
¤
In the
Automatic adjustment of System Time with Time Server
field select
Yes
to activate syn-
chronisation between base station and a time server. If you select
No
the base station
will not adopt time settings from a time server. In this case you should set the time and
date manually using a handset.
¤
The
Last synchronisation with time server
field shows the last time when the base station
compared time and date settings with a time server.
¤
In the
Time Server
field, enter the Internet address or name of the time server from which
the base station should adopt its time and date settings. The time server
"europe.pool.ntp.org" is set as default on the base station. You can overwrite the set-
ting.
¤
From the
Country
list, select the country in which your base station is being operated.
¤
The
Time Zone
field shows the valid time zone for the
Country
. It shows the deviation
between local time (not summer time) and Greenwich Mean Time (GMT).
If a country is divided into various time zones, they will all appear in the list. Select the
appropriate
Time Zone
for the base station from the list.
¤
The
Automatically adjust clock to summer-time changes
field will be displayed if your time
zone differentiates between summer time and winter time.
Activate
On
if you want the time to change automatically to summer time or winter time
when summer time begins and ends respectively.
Activate
Off
if you do not want to change to summer time.
