Siemens GIGASET C470 IP User Manual Download Page 170

Page: 170 / 219

167

Appendix

Questions and answers

Gigaset C470-C475 IP / GBR / A31008-M1916-L101-1-7619 / appendix.fm / 7.2.08

ion 2.

08.0

1.20

The integrated answer machine of your Gigaset C475 IP reports "Invalid PIN" on remote opera-

tion.

1. You have entered the wrong system PIN.

Enter the system PIN again.

2. The system PIN is still set to 0000.

Change the system PIN (page 114).

The answer machine of your Gigaset C475 IP does not record messages/has switched to notifi-

cation announcement.

Its memory is full.

Delete old messages.

Play back new messages and delete.

The answer machine of your Gigaset C475 IP will not record a conversation or interrupts the

recording.

The display shows

Delete messages

The answer machine's memory is full.

Use a different handset to delete messages from the answer machine and restart two-way record-

ing.

Or:

Finish the call, delete old messages from the answer machine and re-establish the connection.

Summary of Contents for GIGASET C470 IP




























































































































































































































Search results

Summary of Contents for GIGASET C470 IP

Reviews:

Related manuals for GIGASET C470 IP

Brands by name

Popular brands

Siemens GIGASET C470 IP, User Manual

Search results

Summary of Contents for GIGASET C470 IP

Reviews:

Related manuals for GIGASET C470 IP

Brands by name

Popular brands