manualshive.com logo in svg

Siemens GIGASET C470 IP, User Manual

The Siemens GIGASET C470 IP is a versatile and user-friendly cordless phone system. Unlock the full potential of this advanced device by easily accessing its comprehensive User Manual, available for free download at manualshive.com. Learn how to optimize its features and enjoy the convenience it brings to your communication needs.

Share
Download
background image

193

Glossary

Gigaset C470-C475 IP / GBR / A31008-M1916-L101-1-7619 / glossary.fm / 7.2.08

Ve

rs

ion 2.

1, 

08.0

1.20

07

Fragmentation

Data packets that are too big are split into smaller packets (fragments) before they are 

transferred. They are put together again when they reach the recipient (defragmented). 

Full duplex

Data transfer mode in which data can be sent and received at the same time.

G

G.711 a law, G.711 µ law 

Standard for a 

Codec

. 

G.711 delivers a very good voice quality that corresponds to that in the ISDN fixed line. 

As there is little compression, the necessary bandwidth is around 64 kbit/s per voice con-

nection, but the delay caused by coding/decoding is only 0.125 ms. 
"a law" describes the European standard and "µ law" describes the North American/Jap-

anese equivalent. 

G.722

Standard for a 

Codec

. 

G.722 is a 

broadband

 language codec with a bandwidth of 50 Hz to 7 kHz, a net trans-

fer rate of 64 kbit/s per language connection and integrated speech pause recognition 

and comfort noise generation (silence suppression). 
G.722 delivers very good voice quality. A higher sampling rate provides clearer and bet-

ter voice quality than other codecs and enables a speech tone in High Definition Sound 

Performance (HDSP). 

G.726

Standard for a 

Codec

. 

G.726 delivers a good voice quality. It is inferior to the quality with codec 

G.711

 but bet-

ter than with 

G.729

. 

G.729A/B

Standard for a 

Codec

. 

The voice quality is rather lower with G.729A/B. As a result of the high level of compres-

sion, the necessary bandwidth is only around 8 kbit/s per voice connection, but the 

delay is around 15 mins. 

Gateway

Connects two different 

Networks

, e.g. a router as an Internet gateway. 

For phone calls from 

VoIP

 to the telephone network, a gateway has to be connected to 

the IP network and the telephone network (gateway/VoIP provider). It forwards calls 

from VoIP to the telephone network as required.

Gateway Provider

See 

SIP provider

. 

Global IP Address

See 

IP address

.

GSM 

Global System for Mobile Communication

Originally, European standard for mobile networks. GSM can now be described as a 

worldwide standard. In the USA and Japan national standards are now more frequently 

supported than in the past.

Summary of Contents for GIGASET C470 IP




























































































































































































































Reviews:

No comments

Related manuals for GIGASET C470 IP

Accutone T3 User Manual & Installation Manual preview
T3
Brand: Accutone Pages: 6
Radio Shack 43-141 Quick Start Manual preview
43-141
Brand: Radio Shack Pages: 2
D-Link DVC-1000 Manual preview
DVC-1000
Brand: D-Link Pages: 58
Yealink SIP-T57W Manual preview
SIP-T57W
Brand: Yealink Pages: 8
Yealink T41S Quick Reference Manual preview
T41S
Brand: Yealink Pages: 6
Yealink T33G Quick Start Manual preview
T33G
Brand: Yealink Pages: 9
Nortel NT8B45AAAB Installation Manual preview
NT8B45AAAB
Brand: Nortel Pages: 56
Lucent Avaya 6402D User Manual preview
Avaya 6402D
Brand: Lucent Pages: 9
TIE Ultracom DCX Feature Handbook preview
Ultracom DCX
Brand: TIE Pages: 28
BT Featureline User Manual preview
Featureline
Brand: BT Pages: 51
Dictaphone Connexions Quick Reference preview
Connexions
Brand: Dictaphone Pages: 24
CallerID Vertex VoIP Caller ID Manual preview
Vertex VoIP Caller ID
Brand: CallerID Pages: 47
Uniden 1EXI7960 Owner'S Manual preview
1EXI7960
Brand: Uniden Pages: 33
Chronos Telecom RevolutionPBX Installation Manual preview
RevolutionPBX
Brand: Chronos Telecom Pages: 38
Blueant S3 Compact User Manual preview
S3 Compact
Brand: Blueant Pages: 60
Linksys WRV200 Quick Installation Manual preview
WRV200
Brand: Linksys Pages: 2
Clarity DIIIP Specification preview
DIIIP
Brand: Clarity Pages: 2
Clarity XL50 User Manual preview
XL50
Brand: Clarity Pages: 104

Brands by name

Popular brands

Load more brands