Siemens GIGASET C470 IP User Manual Download Page 122

Page: 122 / 219

119

Making VoIP settings

Changing settings without the connection assistant

Gigaset C470-C475 IP / GBR / A31008-M1916-L101-1-7619 / settings_bs_hs_pabx.fm / 7.2.08

ion 2.

08.0

1.20

Select country and press

§OK§

Select your VoIP provider and press

§OK§

Your VoIP provider data is downloaded and saved in your phone.

Automatic update for the VoIP provider settings

After the first download of the VoIP provider settings, your phone will check daily whether

a newer version of the file for your VoIP provider is available via the Internet on the Siemens

configuration server. If this is the case, when the handset is in idle status the message

New

profile available

will be displayed, and the message key

flashes.

Press the message key.

§Yes§

Press the display key to confirm the prompt.

Enter the system PIN and press

§OK§

The new data for your VoIP provider will be downloaded and saved on the phone.

Entering/changing VoIP user data

The VoIP settings must also be extended for your personal data. You will receive all neces-

sary data from your VoIP provider.

Settings

Telephony

VoIP

(Enter system PIN)

Provider Registr.

Change multiple line input:

Username:

Enter the user name (caller ID) for your VoIP provider account.

Username

is often identi-

cal to your Internet telephone number (the first part of your SIP address, see page 136).

Authent. Name: / Authent. Password:

Enter the provider-dependent access data that has to be transferred by the phone to the

SIP service at registration.

Click

§Save§

to save the settings.

Please note:

– If an error occurs during the download, an error message will be displayed. You can find possible

messages and measures in the table on page 163.

– You can make and adapt the general settings for your VoIP provider manually via your phone's

Web configurator, see page 133.

Please note:

– If you reply to the prompt with

§No§

, the display will not be repeated. The message

New profile avail-

able

will only be shown again if a newer version of the VoIP settings than the one rejected is avail-

able.

– You can deactivate the automatic version check via the Web configurator (page 161).

Please note:

When making these entries, please remember the VoIP user data is case sensitive. To enter text see

page 177.

Summary of Contents for GIGASET C470 IP




























































































































































































































Search results

Summary of Contents for GIGASET C470 IP

Reviews:

Related manuals for GIGASET C470 IP

Brands by name

Popular brands

Siemens GIGASET C470 IP, User Manual

Search results

Summary of Contents for GIGASET C470 IP

Reviews:

Related manuals for GIGASET C470 IP

Brands by name

Popular brands