Siemens GIGASET C470 IP User Manual Download Page 41

Page: 41 / 219

Operating the handset

Display keys

Gigaset C470-C475 IP / GBR / A31008-M1916-L101-1-7619 / telephony.fm / 7.2.08

ion 2.

08.0

1.20

In lists and menus

Scroll up/down line by line.

Open the submenu.

Go back one menu level or cancel.

During an external call

Press and release to open the handset directory.

Press and hold to open the Gigaset.net directory.

Initiate an internal consultation call.

Adjust the loudspeaker volume for earpiece and handsfree mode.

Display keys

The current display functions are shown in the bottom display line in reversed highlights.

The function of the display keys changes depending on the particular operating situation.
Example:

1 Current display key functions are shown in the bottom display line.

2 Display keys

The most important display icons are:

§Options§

Open a situation-dependent menu (context menu).

Delete key: deletes one character at a time from right to left.

Go back one menu level or cancel operation.

Fetch e-mail address from the directory.

Copy number into directory.

Forward external call to the answer machine (Gigaset C475 IP).

Reverting to idle status

You can revert to idle status from anywhere in the menu as follows:

Press and

hold

the end call key

Or:

Do not press any key: after 2 minutes the display will

automatically

revert to idle status.

Changes that you have not confirmed or saved by pressing

§OK§

§Yes§

§Save§

§Send§

Save

Entry

§OK§

will be lost.

You can find an example of the display in idle status on page 1.

INT

SMS

Summary of Contents for GIGASET C470 IP




























































































































































































































Search results

Summary of Contents for GIGASET C470 IP

Reviews:

Related manuals for GIGASET C470 IP

Brands by name

Popular brands

Siemens GIGASET C470 IP, User Manual

Search results

Summary of Contents for GIGASET C470 IP

Reviews:

Related manuals for GIGASET C470 IP

Brands by name

Popular brands