Siemens GIGASET C470 IP User Manual Download Page 75

Page: 75 / 219

Operating the base station answer machine

Operation via the handset

Gigaset C470-C475 IP / GBR / A31008-M1916-L101-1-7619 / answering_m.fm / 7.2.08

ion 2.

08.0

1.20

In answer and record mode

If the memory is full the answer machine automatically switches to announce only mode.

Delete old messages.

The answer machine reverts automatically to answer and record mode.

Selecting announcement mode

You can choose between

Ans. & Record

and

Announce Only

Settings

Voice Mail

Local AM

Announcements

Set Ans. Mode

Ans. &

Record

Announce Only

(

= on)

Press

and

hold

(idle status).

The selected mode is saved even after the answer machine is deactivated.
The selection process will be cancelled if the message memory is already full when you

change to

Ans. & Record

mode. You will be requested to delete old messages. The answer

machine stays in announce only mode

Announce Only

Delete old messages.

Only after messages have been deleted can you switch the answer machine to answer and

record mode.

Setting "Answer & Record" or "Announce Only" by toggling

You can use the

Ans Mode Time

setting to change over the announcement mode for a spe-

cific period.

Example:

Ans. & Record

mode is set. If you activate

Ans Mode Time

and set the time period

From:

18.00,

Until:

08:00 the answer machine will switch to

Announce Only

mode every day

at 18:00 (if it is switched on). It will switch back to

Ans. & Record

mode at 08:00 the next

day.

Settings

Voice Mail

Local AM

Announcements

Set Ans. Mode

Ans

Mode Time

(

= on)

Change multiple line input:

From:

Enter hours/minutes for the start of the period in 4-digit format.

Until:

Enter hours/minutes for the end of the period in 4-digit format.

Activation:

Select

Off

Save changes with

§Save§

If the messages memory is full and

Activation: On

has been selected, saving is interrupted

and you will receive an instruction to delete old messages.

Delete old messages and repeat the setting.

As soon as you change the announcement mode (page 72), the

Ans Mode Time

function is

automatically deactivated. You may have to reactivate it if required.
If you do not enter a time for

From: / Until:

Ans Mode Time

will still be activated but the

machine will not switch to announcement mode.

‰

Summary of Contents for GIGASET C470 IP




























































































































































































































Search results

Summary of Contents for GIGASET C470 IP

Reviews:

Related manuals for GIGASET C470 IP

Brands by name

Popular brands

Siemens GIGASET C470 IP, User Manual

Search results

Summary of Contents for GIGASET C470 IP

Reviews:

Related manuals for GIGASET C470 IP

Brands by name

Popular brands