Siemens GIGASET C470 IP User Manual Download Page 89

Page: 89 / 219

Messenger

Changing/checking your personal status, going offline

Gigaset C470-C475 IP / GBR / A31008-M1916-L101-1-7619 / messenger.fm / 7.2.08

ion 2.

08.0

1.20

Lost connection

If your phone loses its connection to the messenger server, the display key

will flash

on the handset that had been connected to the messenger. In idle status it will display

Messenger connection failed!

". All messages that you had previously received, as well as any

message you were currently writing, will be saved.
Reconnecting:

Press the message key.

§Yes§

Press the display key to confirm the prompt.

The phone will attempt to reconnect. You are informed about the status of the connection

by messages on the display.
If you reply to the request with

§No§

the phone will behave as during regular disconnection.

All messenger messages will be deleted. The phone is offline.

Changing/checking your personal status, going offline

You want to log off (go offline) or let your buddies know whether you wish to chat or would

prefer to remain undisturbed.
You have the following options:

Offline

You log off from the messenger server. The messenger server informs your buddies that

you are no longer available.
The handset switches to idle status. You can neither send nor receive messages.

Online

(Setting after successful connection)
You are logged on to the messenger server and can send and receive messages.

Ready for chat

You are

Online

and can send and receive messages.

You invite your buddies to "chat" with you.

Away / Extended Away / Do not disturb

You are

Online

and can send and receive messages. You inform your buddies that you

currently cannot/do not wish to "chat", i.e. will not reply to their messages immediately.

Invisible

You are

Online

and can send and receive messages.

However, the messenger server indicates to your buddies that you are

Offline

Please note:

You can also assign the messenger to one of the display keys on your handset (page 108). The con-

nection is established when you press the display key.

Please note:

All status settings apart from

Offline

only inform other buddies about your communication status.

Whether this information is passed on to your buddies depends on the provider.

Summary of Contents for GIGASET C470 IP




























































































































































































































Search results

Summary of Contents for GIGASET C470 IP

Reviews:

Related manuals for GIGASET C470 IP

Brands by name

Popular brands

Siemens GIGASET C470 IP, User Manual

Search results

Summary of Contents for GIGASET C470 IP

Reviews:

Related manuals for GIGASET C470 IP

Brands by name

Popular brands