Siemens GIGASET C470 IP User Manual Download Page 167

Page: 167 / 219

164

Appendix

Questions and answers

Gigaset C470-C475 IP / GBR / A31008-M1916-L101-1-7619 / appendix.fm / 7.2.08

ion 2.

08.0

1.20

The display is blank.

1. The handset is not switched on.

Press

and hold

the end call key

2. The battery is flat.

Charge the battery or replace it (page 11).

The keys of a handset do not respond when pressed.

The keypad lock is activated.

Press and

hold

the hash key

(page 37).

Base "X"

flashes

on the display.

1. The handset is out of range of the base station or the base station's range has changed because

eco mode is active.

Move the handset closer to the base station.

If necessary, deactivate eco mode (page 24).

2. The handset has been de-registered.

3. The base station is not turned on.

Check the base station's mains adapter (page 15).

4. An update of the base station firmware is currently being conducted (page 116/page 159).

Pease wait until the update is complete.

Base Search

flashes in the display.

The base station is out of range or switched off.

Move the handset closer to the base station.

Check the base station mains adapter.

Handset does not ring.

1. The ringer tone is switched off.

Activate the ringer tone (page 111).

2. Call forwarding set to

All Calls

Deactivate call forwarding (fixed line network page 45; VoIP page 47/page 146).

You cannot hear a ringer/dialling tone from the fixed line network.

The phone cord supplied has not been used or has been replaced by a new cord with the wrong jack

pin connections.

When purchasing a new cord, ensure that it has the correct pin connections (page 17).

Error tone sounds after system PIN prompt.

You have entered the wrong system PIN.

Enter system PIN if required.

Have you forgotten the system PIN?

Carry out a reset on the base station to set the system PIN back to 0000 (page 115).

The other party cannot hear you.

You have pressed the

(INT) key. The handset is "muted".

Activate the microphone again (page 36).

Summary of Contents for GIGASET C470 IP




























































































































































































































Search results

Summary of Contents for GIGASET C470 IP

Reviews:

Related manuals for GIGASET C470 IP

Brands by name

Popular brands

Siemens GIGASET C470 IP, User Manual

Search results

Summary of Contents for GIGASET C470 IP

Reviews:

Related manuals for GIGASET C470 IP

Brands by name

Popular brands