Siemens GIGASET C470 IP User Manual Download Page 66

Page: 66 / 219

SMS (text messages)

Writing/sending an SMS

Gigaset C470-C475 IP / GBR / A31008-M1916-L101-1-7619 / sms_BRD_neutral.fm / 7.2.08

ion 2.

08.0

1.20

Draft message list

You can save an SMS in the draft message list and edit and send it later.

Saving an SMS in the draft message list

Write an SMS (page 62).

§Options§

Press the display key.

Save

Select and press

§OK§

Opening the draft message list

Messaging

SMS

(mailbox, mailbox PIN)

Outgoing (3)

Select and press

§OK§

. The number of SMS messages in the list will be shown in

brackets (e.g. (

)).

The first list entry is displayed, e.g.

Reading or deleting SMS messages

Open the draft message list and then:

Select SMS.

§Read§

Press the display key. The entry will be displayed. Scroll line by line using

Or:

§Options§

Open menu.

Delete Entry

Press

§OK§

. The selected SMS message is deleted.

You can use

§Options§

Delete all

to delete every SMS in the draft message list.

Writing/changing an SMS

You are reading an SMS in the draft message list.

§Options§

Open menu.

You have the following options:

New SMS

Write a new SMS and then send (page 62) or save it.

Edit

Edit the text of the saved SMS and then send it (page 62).

Character Set

Text is shown in the selected character set.

Please note:

After saving, the SMS editor with your SMS will be displayed again. You can continue writing the text

and save it again. The SMS that was saved previously will be overwritten.

1234567890
15.01.08 12:20

Summary of Contents for GIGASET C470 IP




























































































































































































































Search results

Summary of Contents for GIGASET C470 IP

Reviews:

Related manuals for GIGASET C470 IP

Brands by name

Popular brands

Siemens GIGASET C470 IP, User Manual

Search results

Summary of Contents for GIGASET C470 IP

Reviews:

Related manuals for GIGASET C470 IP

Brands by name

Popular brands