Siemens GIGASET C470 IP User Manual Download Page 76

Page: 76 / 219

Operating the base station answer machine

Operation via the handset

Gigaset C470-C475 IP / GBR / A31008-M1916-L101-1-7619 / answering_m.fm / 7.2.08

ion 2.

08.0

1.20

Recording a personal announcement/notification

Pre-recorded announcements are stored in your telephone for both announcement modes.

The pre-recorded announcements are used if there is no personal announcement for the

mode concerned.

Settings

Voice Mail

Local AM

Announcements

Record Announce

Record

Anc Only

§OK§

Press the display key to start the recording.

When the recording starts, the handset changes to handsfree mode. You hear the ready

tone (short tone).

Now speak your announcement (at least 3 secs.).
Use

”

to cancel recording and

§OK§

to restart the recording process.

The recording is cancelled if the answer machine memory is full.

Delete old messages and repeat recording if required.

Stop recording:

§End§

Press the display key.

After recording, the announcement is played back for you to check.
You can re-record the announcement with

§New§

You can cancel the playback by pressing

”

Please note:

Recording ends automatically if the maximum recording time of 170 seconds is

exceeded or there is a break in speech for more than 2 seconds.

If you cancel the recording, the previously recorded announcement will be deleted. The

pre-recorded announcement will be used again.

The recording is cancelled if the answer machine memory is full.

Delete old messages and repeat recording if required.

If an external call is received during a recording for one of the handset's receive num-

bers, the recording is interrupted and the call is signalled on the handset.

Playing back announcements

Settings

Voice Mail

Local AM

Announcements

Play Announce

Play Anc

Only

If you have not recorded a personal announcement, the relevant pre-recorded announce-

ment is played.

Record a new announcement while playing back the announcement:

§New§

Press the display key. For further information, page 73.

Summary of Contents for GIGASET C470 IP




























































































































































































































Search results

Summary of Contents for GIGASET C470 IP

Reviews:

Related manuals for GIGASET C470 IP

Brands by name

Popular brands

Siemens GIGASET C470 IP, User Manual

Search results

Summary of Contents for GIGASET C470 IP

Reviews:

Related manuals for GIGASET C470 IP

Brands by name

Popular brands