Siemens GIGASET C470 IP User Manual Download Page 70

Page: 70 / 219

SMS (text messages)

SMS mailboxes

Gigaset C470-C475 IP / GBR / A31008-M1916-L101-1-7619 / sms_BRD_neutral.fm / 7.2.08

ion 2.

08.0

1.20

SMS mailboxes

The

general mailbox

is the default setting. Anyone can access this mailbox and it cannot

be protected by a PIN. You can additionally set up three

personal mailboxes

and protect

these with a

PIN

. Each mailbox is identified by a name and a "mailbox ID" (a kind of exten-

sion number).

Please note:

If you operate a number of devices (base stations) with SMS functionality on a single

phone line, then each SMS mailbox ID may only occur once. In this case you must also

change the preset ID of the general mailbox ("0").

You can only use personal mailboxes if your service provider supports this function. You

can tell whether this is the case by the addition of a star (*) to the number of a (preset)

SMS centre.

If you have forgotten your mailbox PIN, you can reset it by restoring the base station's

default settings. This will

delete all SMS messages from all mailboxes

Setting up and changing a personal mailbox

Setting up a personal mailbox

Messaging

SMS

Settings

SMS Mailboxes

Select mailbox, e.g.

Mailbox 2

, and press

§OK§

Change multiple line input:

On/Off:

Activate or deactivate mailbox.

ID:

Select mailbox ID (0–9). You can only select the available numbers.

Protection:

Activate/deactivate PIN protection.

PIN:

If necessary, enter 4-digit PIN.

Save changes (page 177).

Active mailboxes are marked with

in the mailbox list. They are shown in the SMS list and

can, if necessary, be displayed by pressing the message key

Deactivating a mailbox

Set

On/Off:

Off

. Confirm message with

§Yes§

if necessary.

All

SMS messages saved in this mailbox will be deleted.

Deactivating PIN protection

Set

Protection:

Off

The mailbox PIN is reset to "0000".

‰

Summary of Contents for GIGASET C470 IP




























































































































































































































Search results

Summary of Contents for GIGASET C470 IP

Reviews:

Related manuals for GIGASET C470 IP

Brands by name

Popular brands

Siemens GIGASET C470 IP, User Manual

Search results

Summary of Contents for GIGASET C470 IP

Reviews:

Related manuals for GIGASET C470 IP

Brands by name

Popular brands