Siemens GIGASET C470 IP User Manual Download Page 67

Page: 67 / 219

SMS (text messages)

Receiving an SMS

Gigaset C470-C475 IP / GBR / A31008-M1916-L101-1-7619 / sms_BRD_neutral.fm / 7.2.08

ion 2.

08.0

1.20

Receiving an SMS

All received SMS messages are saved in the incoming message list. Linked SMS messages

are displayed as

one

message. If this is too long (it consists of too many linked individual

SMS messages) or if it was not fully transmitted, it will be split into several individual SMS

messages.
Since an SMS remains in the list even after it has been read, you should

regularly delete

SMS messages from the list

The display tells you if the SMS memory is full.

Delete SMS messages you no longer require (page 64).

Incoming message list

The incoming message list contains:

All received SMS messages, starting with the most recent.

SMS messages that could not be sent due to an error.

New SMS messages are signalled on all Gigaset C47H handsets by the

icon in the display,

the flashing message key

and an advisory tone.

Opening the incoming message list with the

key

Press.

Select a mailbox if necessary and enter mailbox PIN.
The incoming message list is displayed as follows (example):

Bold:

number of new entries

Regular:

number of read entries

2 Name of mailbox, here: general mailbox

Open list with

§OK§

An entry in the list is displayed as in the following example:

1 Number of the sender or name of the directory entry

SMS status:

Bold:

new unread SMS messages

Regular:

old read SMS messages

Opening the incoming message list via the SMS menu

Messaging

SMS

(mailbox, mailbox PIN)

Incoming (2)

Reading or deleting SMS messages

Open the incoming message list.

Continue as described in "Reading or deleting SMS messages", page 63.

After you have read a new SMS, it is given the status "Old" (it is no longer shown in bold).

SMS: (2)

1
2

1234567890

01.01.08

09:45

Summary of Contents for GIGASET C470 IP




























































































































































































































Search results

Summary of Contents for GIGASET C470 IP

Reviews:

Related manuals for GIGASET C470 IP

Brands by name

Popular brands

Siemens GIGASET C470 IP, User Manual

Search results

Summary of Contents for GIGASET C470 IP

Reviews:

Related manuals for GIGASET C470 IP

Brands by name

Popular brands