Siemens FIDAMAT 6, Operating Instructions Manual, Page: 117 / 202

Functions
8.6 Configuration
FIDAMAT 6
Operating Instructions, 01/2019, A5E00222135-04
115
8.6.5 ELAN configuration (function 73)
Figure 8-47 Configuring ELAN
With this function, you set the parameters for an ELAN network.
●
Channel address:
Set the channel address here. Addresses from one to twelve can be set. In an ELAN
network, each address may only be used once.
●
Measured value telegrams on/off:
Here you activate or deactivate the independent cyclic sending of measured values every
500 ms.
Note
Independent sending of measured values
If you have set up your own communication control system, this option offers a simple
way of checking an ELAN telegram. In order to avoid unnecessarily loading of the device
and the ELAN network, however, the function should only be switched on as needed!
●
ELAN tag:
Display of the tag assigned for this device in the ELAN network.
Further ELAN details can be found in the ELAN interface description:
● (C79000-B5200-C176 German)
● (C79000-B5276-C176 English)
See also
ELAN interface cable (Page 51)