10–18
10–19
EWA 4NEB 812 6096–02b
EWA 4NEB 812 6096–02b
ET 200 Handheld
ET 200 Handheld
Q Byte SL01
³
Identifier–specific/
Device–specific d.
channel diagnostics
Dev 00 01 02 03
³
Dia 1A FF E3 D3
CH01
cable
SL01 Q04B
¹
Dia K:A
Dia #####1##
###############
and bit 2 = 1
DeviceDia
Header No 1
³
Q 00 01 02 03
Dia 3E BB E4 56
Selection
Station diagnostics
Status/
SlotDia
Header No 1
³
Force
Selection:
Line 1: An output comprising 4 bytes is on slot 1 of the
DP Standard slave.
There exist further slots, which you can either enter directly
or select with the cursor keys.
Line 2: If “Dia” is flashing, you can change over to station
diagnostics.
The output is consistent over the entire output area.
Status/Force:
You can set outputs and press
to confirm.
Station diagnostics:
Device–specific and identifier–specific/channel diagnostic
bits have been reported.
Device–specific diagnostics (DeviceDia):
You can read the manufacturer–specific diagnostics data.
Identifier–specific/channel diagnostics (SlotDia):
Line 1: Output on slot 1 has 1 byte per channel. Diagnostic
bits have been reported for at least one further slot.
Line 2: Channel 1 reports wire break.
Example
DP Standard Slave
DP Standard Slave
