9–6
9–7
EWA 4NEB 812 6096–02b
EWA 4NEB 812 6096–02b
ET 200 Handheld
ET 200 Handheld
No### SL## ###
¹
Dia:###### SL##
¹
Station number
Module slot
Address identifier
Other slots
Another slot
No. of set bit of
Slot with diagnostics message
station diagnostics
exist
with diagnostics
Display: MODULE SELECTION
message exists
The “MODULE SELECTION” display gives you an over-
view of the ET 200U station status:
Cursor in the first line: Select the slots with the cursor
control keys or the numerical keys. The module plugged
into the relevant slot is displayed in the “Address identifier”
field.
Press
to select the displayed module for the STATUS/
FORCE function.
Change lines by pressing
.
Cursor in the 2nd line: You can use the cursor keys to
have the module slots displayed which have diagnostic
messages.
Table 9.3
The “MODULE SELECTION” display
Abbr.
Description
1st line
No###
Station number (3 to 124) of ET 200U station
SL##
Module slot
###
Address identifier of the module (
³
end of this
Chapter)
¹
There are other slots that can be selected with the
cursor keys
2nd line
Dia
######
Station diagnostics
If “Dia” is flashing, you can press to change
over to the “Station Diagnostics” display
(
³
SL##
Slot with diagnostics message
¹
There is at least one other slot with a diagnostics
message; you can select this slot with the cursor
keys.
ET 200U
ET 200U
