10–6
10–7
EWA 4NEB 812 6096–02b
EWA 4NEB 812 6096–02b
ET 200 Handheld
ET 200 Handheld
User Parameters?
Y/N
Y
N
00 01 02 03
³
Par $$ $$ $$ $$
Continued
on following page
Continued
from previous page
User Parameters: If the DP Standard slave requires user
parameters, you have to press
to enter them. The input
display for user parameters appears.
Line 1: The numbers correspond to the byte numbers in the
parameterizing message.
Line 2: You can enter up to 25 bytes of a parameterizing
message in this line. Please refer to the “DP Standard
Slave” manual for the significance of the user parameters.
“
²
” or “
³
” indicate that there are more data to the left or
to the right of the area displayed.
Fill in all bytes required and press
to confirm the para-
meterizing message.
The parameterizing message is then transferred to the
DP Standard slave.
Note
Each RESET of the ET 200 handheld
requires the parameterizing message
to be re–entered.
Then branch to the “SELECTION” display.
DP Standard Slave
DP Standard Slave
