EWA 4NEB 812 6096–02b
EWA 4NEB 812 6096–02b
ET 200 Handheld
ET 200 Handheld
Safety Notes for the User
This manual contains important information you must ob-
serve in the interest of your own personal safety and to
avoid damage to equipment and property. The notices are
highlighted by a warning triangle, drawing your attention,
like the example below, to various degrees of danger:
!
Warning
means that death, grievous bodily
harm or serious damage to equip-
ment or property may ensue if the
appropriate precautionary measures
are not taken.
The unit may be started up and operated only by qualified
personnel. Qualified personnel, as understood by the sa-
fety notes quoted in this manual, are persons authorized to
start up, ground and label units, systems and circuits in kee-
ping with the relevant safety standards.
Application
The ET 200 handheld is a low–priced alternative to the pro-
grammer for system start–up and diagnostic functions in
connection with
S
the ET 200 slave stations ET 200B, ET 200C,
ET 200K and ET 200U
or
S
a DP Standard slave
or
S
a slave station with an SPM module that can be operated
on the SINEC L2–DP LAN.
With the ET 200 handheld, you can
S
determine and display the number of a slave station
S
Change the station number (not in the case of the
ET 200B/U)
S
display the status of the inputs
S
force the outputs
S
carry out self–test functions on the ET 200 handheld
Other ET 200 functions depend on the type of slave station
connected (
Safety Notes
1–1
1
