Siemens ET 200, Manual

Page: 8 / 59

2–4 2–5 EWA 4NEB 812 6096–02b EWA 4NEB 812 6096–02b
ET 200 Handheld ET 200 Handheld
DP Standard
slave
(
Chapter 10)
User parameters
Selection of port
STATUS/FORCE
SPM module
(
Chapter 11)
Selection of port
STATUS/FORCE
Diagnostics
Continued from previous page
Connecting the ET 200 handheld via
its connector to the bus interface of the
slave station (
Chapter 3)
Enables you to branch to the self–test
function (
Chapter 3)
ET 200 handheld displays the station
number (enables you to make chan-
ges), (
Chapter 3)
ET 200 handheld recognizes the sta-
tion type (
Chapter 3)
Display of inputs
and outputs
Diagnostics
overview
Display of inputs
and outputs,
diagnostics
Connecting the
ET
200 Handheld to a
Slave Station
This chapter describes
S
How to proceed after connecting the ET 200 handheld
to the slave station
S
How to get into the self–test function.
The self–test function is not mandatory. You only need it if
you suspect, for instance, that a key is not functioning pro-
perly or that errors are appearing in the display.
Normally you do not need the self–test function.
!
Warning
This may be a dangerous plant
condition!
The ET 200 handheld cannot be op-
erated on the active SINEC L2–DP
LAN:
Always first unplug the SINEC
L2–DP LAN before plugging the
ET 200 handheld into the connector
of the slave station.
Overview of Display Structures Überblick über die Struktur der Masken
3–1
3