9–20
EWA 4NEB 812 6096–02b
EWA 4NEB 812 6096–02b
ET 200 Handheld
ET 200 Handheld
Order No.
Address Identifier
Address
Length
DP Siemens
DP Standard
Length
(bytes)
CP 521 SI
521–8MA21
4AX
4AX
8
*
CP 521 BASIC
521–8MB11
4AX
4AX
8
*
IP 265
265–8MA11
(in slow mode
only)
4AX
4AX
8
*
330–8MA11
or no module
plugged in
000
000
0
*
This length is required for both inputs and outputs.
That is, a two–byte address needs two bytes for the
digital inputs and two for the digital outputs.
1
These analog modules can be operated with one, two
or four channels.
2
These analog modules can be operated with one or
two channels.
3
4–channel digital modules are always read in as
8–channel digital modules.
4
This module occupies 2 slots.
DP Standard Slave
The ET 200 handheld performs the following functions in
connection with the DP Standard slave:
S
Display and modification of station number
S
Sending of user–specific parameters (user parameters)
S
Output of identifier
S
STATUS/FORCE function and
S
Station status, device–specific, identifier–specific and
channel–specific diagnostics.
!
Warning
The setting of outputs when the load
circuit is closed may lead to danger-
ous plant conditions.
Set outputs are reset after about 2 se-
conds if you
S
press or
S
plug the connector of the ET 200
handheld in or disconnect it from
the slave station.
ET 200U
ET 200U
10–1
10
