Siemens ET 200, Manual

Page: 16 / 59

5–6 5–7
EWA 4NEB 812 6096–02b EWA 4NEB 812 6096–02b
ET 200 Handheld ET 200 Handheld
SL$$ #########
Dia K:#/#
Dia ########
###############
Continued
from previous page
“STATUS/FORCE” display:
pages 5-8 and 5-9
Continuation
page 5-10
The “SELECTION” display provides you with an overview
of the ET 200B–DP:
Line 1: Use the cursor keys or the numerical keys “0” or
“1” to select a slot. The following applies for the
ET 200B–DP:
S
Slot 0 (“SL00”) is an identifier for an output area,
S
Slot 1 (“SL01”) is an identifier for an input area.
The identifier ( Table 5.2) is output in the next field.
Line 2: The consistency of the selected identifier is output
via the “
K:#/#
” parameter.
Press to select the slot for the STATUS/FORCE func-
tion.
Table 5.2 Explanation of the “SELECTION” display
Abbreviation Significance
1st line
SL$$
Slot “
SL00
” for an output
Slot “ SL01 ” for an input
######### Identifier, e.g.:
I02B
: Input area comprising 2 bytes (I)
Q02B
: Output area comprising 2 bytes (Q)
2nd line
Dia
If “Dia” is flashing, this indicates that diagnostic
bits have been reported, and you can enter
to change over to the “STATION DIAGNOS-
TICS” display (
page 5-10).
K:#/#
Consistency of inputs/outputs
B: Consistency over one byte
ET 200B–DP ET 200B–DP