ACUSON Cypress™ Operator’s Manual
A-5
Connecting a SVHS VCR
Connecting a
SVHS
VCR
WARNING
Do not use a peripheral device, such as a monitor,
VCR
or printer
within 1.5 meters of a patient unless the device receives power
from an isolation transformer that meets medical safety stan-
dards.
NOTE: To obtain the best video playback, use an SVHS recorder and SVHS
videotapes.
To connect a
SVHS VCR
to the Cypress system, follow these steps:
1.
Make sure both the Cypress system and the
VCR
are turned
OFF
.
FIGURE 50.
Cypress System SVHS VCR Connectors and Cables
2.
Connect the gray
SVHS
cable to the
SVIDEO INPUT
connector on the back of
the
VCR
3.
Connect the red and white cables to the two
AUDIO IN
connectors on the
back of the
VCR
(see Figure 51).
15-PIN
CONNECTOR
RED AND
WHITE
AUDIO OUT
RCA PLUGS
GRAY SVHS
PLUG
YELLOW
CABLE NOT
USED FOR
SVHS
NOT USED
FOR SVHS