ACUSON Cypress™ Operator’s Manual
8-3
Connecting and Using ECG
5.
If the
ECG
is not displayed at the bottom of the screen, press
SETUP
to dis-
play the Setup menu and then double-click the
Setup
tab. Highlight the
ECG
subtitle and click the box next to
ECG
to enter a check mark. If you want to
remove the
ECG
display, click the box once again to remove the check mark.
6.
When you press a Mode key (e.g.,
2D
) in order to return to real-time scan-
ning, the
ECG
waveform will be displayed. It is normal for the system to take
a few moments to automatically adjust gain levels before displaying the
ECG
waveform. The triggers will automatically appear on the R-wave or each car-
diac cycle. They can be turned off only by turning off the
ECG.
Stress Echo ECG Cables and Connectors
All of the adapters described in this section are included in the Stress Echo
option package.
Stress Echo ECG Connectors
Siemens ships a variety of connectors with every Cypress Stress Echo option
package. This ensures that the Cypress system can be properly connected to
most stress systems.
