Basic Setup
3-14
ACUSON Cypress™ Operator’s Manual
Recalling a Saved Preset on the New Patient Screen
When a new patient is added to the system, you can assign a Preset to it by fol-
lowing these steps:
1.
Press
PATIENT
.
2.
Click [
NEW PATIENT
].
3.
Add the patient data.
4.
Click [
PRESETS
].
5.
Highlight a Preset from the pull-down menu and press <
ENTER
> to select it.
6.
Click [
LOAD
]. The Preset is loaded when live imaging begins.
NOTE If a Preset is removed (i.e., deleted) after [LOAD] is clicked and
before the start of live imaging
,
the factory default Preset will be
loaded.
Renaming a User-Defined Preset
To change the name of an existing Preset, follow these steps:
1.
Press the
SETUP
key.
2.
Highlight the
Presets
heading.
3.
Use the pull-down menu to select the Preset option to be renamed.
4.
Click [
RENAME
].
5.
Use the Trackball to place the cursor in the Presets text field and type a new
name.
6.
Click [
OK
].
Removing a User-Defined Preset
To remove an existing Preset, follow these steps:
1.
Press the
SETUP
key.
2.
Highlight the
Presets
heading.
3.
Use the pull-down menu to select the Preset option to be deleted.
4.
Click [
REMOVE
].
NOTE If a Preset is removed (i.e., deleted) after [LOAD] is clicked and
before the start of live imaging
,
the factory default Preset will be
loaded.
