Siemens ACUSON Cypress Operator'S Manual Download

Page: 135 / 306

ACUSON Cypress™ Operator’s Manual

5-45

Pulsed Wave Doppler (PW) Scanning

Soft Windows

Table 22 describes how the Soft Windows and their corresponding knobs on the
keyboard operate in

scanning.

TABLE 22.

PW Scanning Soft Windows Options

Window

Function/Description

PW Steer

(Linear transducer)

Changes the angle of
the

line within the

image

There are three positions: 0°, +20°, –20°. Press the
corresponding Soft Window knob to select

PW STEER

To angle to the right, turn the knob clockwise.

To angle to the left, turn the knob counterclock-
wise.

NOTE

: When using the 7L3 transducer and both

Color and PW are activated, only “

Steer” will be

available in the multifunctional Soft Window. Steer-
ing

will also steer the Color Box. When

and

Color are both active, the multifunctional Soft Win-
dow will toggle between “

Steer” and “

Steer”.

Angle

(Angle Correction)

Adjusts the flow direc-
tion angle

Press the corresponding Soft Window knob to
select and display the angle correction cursor.

Turn the knob to adjust the incident angle to the
direction of flow. The flow direction cursor rotates
relative to the sample volume line and cursor.
The Velocity scale is automatically adjusted for
the angle displayed.

The selected angle is displayed on the screen.

NOTE:

Angle Correction may be activated for all

transducers by selecting

Angle Correction

on the

Setup

menu and putting a checkmark in the

Enabled for all transducers

box.

Summary of Contents for ACUSON Cypress



















































































































































































































































































































Search results

Summary of Contents for ACUSON Cypress

Reviews:

Related manuals for ACUSON Cypress

Brands by name

Popular brands

Siemens ACUSON Cypress, Operator'S Manual

Search results

Summary of Contents for ACUSON Cypress

Reviews:

Related manuals for ACUSON Cypress

Brands by name

Popular brands