ACUSON Cypress™ Operator’s Manual
9-17
Transferring Studies
Sending the Studies
To transfer studies, follow these steps:
1.
Press the
PATIENT
key to display either the Patient List or Study List.
NOTE Click the toggle button located on the left side of the screen to
display the desired list.
2.
Select the study/studies to be transferred (see “Selecting Studies” on page
9-14 for details on how to select studies).
3.
To display the set up screen, click the [
SEND
] button located to the right of
the patient/study list. Use this screen to select the destination, data to be
included in the transfer,
DICOM
compression, and to automatically delete the
study from the Cypress system hard drive upon completion of the transfer.
Multiple formats and destinations can be selected at the same time. The
three type of formats are Cypress, DICOM, and Multimedia.
NOTE To remove the check marks from the destination area, click the All or
Destinations radio button, and then click [
CLEAR
].
FIGURE 43.
The Send Screen
Cancel
Shutdown
Reports
Setup
Patient
Multimedia Format
DICOM Compression
JPEG Compression
None
RLE Lossless
JPEG Lossy
Low High
Clear
Archives
Images
Cypress Format
Report
DICOM Format
All
Destination
OK
Remove Name, ID from
Images
Remove study after
transfer
Entire Study
Only flagged loops
Archives
Images
Entire Study
Only flagged loops
Archives
Report
Images
Entire Study
Only flagged loops
Tabular (Cardiac)
