manualshive.com logo in svg

Siemens ACUSON Cypress, Operator'S Manual

Share
Download
Siemens ACUSON Cypress Operator'S Manual Download Page 141

ACUSON Cypress™ Operator’s Manual

5-51

M-Mode Scanning

Activate the M-Mode Display

To activate the M-Mode time/motion display, follow these steps:

1.

Press the 

M

 mode key once. The 

2D

 sector is live and the Trackball is 

assigned to the M-Mode cursor line. 

2.

Position the cursor in the desired portion of the image, and press the 

M

 mode 

key a second time. This freezes the 

2D

 image and activates the M-Mode 

time-motion display. 

3.

Pressing 

M

 again toggles between the active time-motion display and the 

real-time sector image. You can also re-position the M-Mode sample while 
the 

2D

 image is frozen. The sample line in the 

2D

 image moves but the 

2D

 

image remains frozen.

NOTE The shallowest 10% of the scanning depth (nearest the transducer 

face) is not displayed. For example, if a scanning depth of 16.2 cm is 
selected, the shallowest 1.6 cm is not displayed.

Main Knob Controls Gain and Compress  

When you press the 

M

 mode key two options appear—Compress and 

2D

 Gain. 

If you press 

M

 again the spectral display becomes active and the two options 

are Compress and Gain. Press 

M

 again to make 

2D

 active again. The options 

are controlled by the Main knob. Press the Main knob to toggle between the two 
active options.

Compress 

 Adjusts the presentation of the 

2D

 image by changing the 

Dynamic Range settings. The current setting is shown in the upper left por-
tion of the screen.

2D

 Gain 

(the system default) Displayed when 

2D

 is active. Turn the knob 

clockwise to increase the overall amplification of the 

2D

 image data. Turn 

counterclockwise to decrease.

Gain

  Displayed when the time-motion display is active. Turn the knob clock-

wise to increase the overall amplification of the M-Mode data. Turn counter-
clockwise to decrease.

In Freeze mode, turn the Main knob to scroll through the frames.

M

TO SWITCH 
BETWEEN 
COMPRESS AND 
GAIN, PRESS 
THE MAIN KNOB

Summary of Contents for ACUSON Cypress



















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands