Siemens 7ME6810 Operating Instructions Manual Download Page 8 | Manualshive

Page: 8 / 170

Siemens 7ME6810 Operating Instructions Manual Download Page 8

1.3

Document history

The contents of these instructions are regularly reviewed and corrections are included in

subsequent editions. We welcome all suggestions for improvement.
The following table shows the most important changes in the documentation compared to each

previous edition.

Edition

Remarks

03/2020

● Corrections regarding pulse B output

02/2020

● Update for software version 3.11/device revision AD/015

07/2019

● MAG 8000 Irrigation discontinued and removed

11/2018

● Update for software version 3.09
● Technical data and Appendix C.2 updated

05/2014

● NMI M 10 approval for MAG 8000 Irrigation

10/2012

● Primary operation software changed from Flow Tool to PDM (Flow Tool moved to

appendix)

● Qualification Certificate functionality added

03/2010

● Integration of MAG 8000 for irrigation applications
● Restructuring of the document

1.4

Checking the consignment

1. Check the packaging and the delivered items for visible damages.
2. Report any claims for damages immediately to the shipping company.
3. Retain damaged parts for clarification.
4. Check the scope of delivery by comparing your order to the shipping documents for

correctness and completeness.

WARNING

Using a damaged or incomplete device
Risk of explosion in hazardous areas.
● Do not use damaged or incomplete devices.

1.5

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be connected

Introduction
1.5 Security information

SITRANS FM MAG 8000

8

Operating Instructions, 03/2020, A5E03071515-AH

«
...
6
7
8
9
10
...
»

Summary of Contents for 7ME6810











































































































































































Reviews:

No comments