![background image](http://html.mh-extra.com/html/sick/vms4200/vms4200_addendum-to-operating-instructions_1264378098.webp)
6
COMMISSIONING
98
8026365/V1-0/2022-03|SICK
S U P P L E M E N T A R Y O P E R A T I N G I N S T R U C T I O N S | VMS4200-x/5200-x MID
Subject to change without notice
•
Limit the list to the LMS4000 family and click
Next
to confirm.
▸
Click
Next
to confirm each of the configured search settings, and click
Finish
to
complete.
If the number ranges for the configuration PC and the device correspond, then the
connected LiDAR sensor is detected and displayed in the device list on the right-hand
side.
NOTE!
The LiDAR sensor uses two ports (like all SICK devices). Ports are part of the
network address and can be used to establish various connections between the devices.
Port
2112
is freely parameterizable but port
2111
is a fixed port for outputting data.
It is used for device configuration.