![background image](http://html.mh-extra.com/html/sick/vms4200/vms4200_addendum-to-operating-instructions_1264378101.webp)
COMMISSIONING
6
101
8026365/V1-0/2022-03|SICK
Subject to change without notice
S U P P L E M E N T A R Y O P E R A T I N G I N S T R U C T I O N S | VMS4200-x/5200-x MID
▸
Change the IP address of the configuration PC to the altered address range of the
relevant device.
▸
In the title bar of the device tile, click on the icon with the three dots and select
Remove device entry
.
▸
▸ Perform a new device search in SOPAS. The device is found with its new IP add
ress
and displayed in the device list.
▸
Add the device with port 2111 to the SOPAS project.
▸
Connect the second LMS4x21 to a free port on the LFT Ethernet switch.
NOTE!
As the default IP address for the first LiDAR sensor was changed, this device
can remain connected via Ethernet.
▸
Perform a device search and change the default IP address as described.
NOTE!
It is not necessary to install the device driver for the LMS4x21. This was already
completed when the first LiDAR sensor was added.
▸
Change the IP address of the configuration PC to the address range of the SIM2000-2
Prime controller.
▸
Perform a device search and change the default IP address as described.
The SIM2000-2 Prime controller and LMS, along with their device tiles, are now
included in the SOPAS project.
Procedure in the
event of deviating
address ranges
Configuring the
IP address of the
second LMS4x21
Changing the
IP address of the
SIM2000-2 Prime
controller