![background image](http://html.mh-extra.com/html/sick/vms4200/vms4200_addendum-to-operating-instructions_1264378061.webp)
SYSTEM DESCRIPTION
3
61
8026365/V1-0/2022-03|SICK
Subject to change without notice
S U P P L E M E N T A R Y O P E R A T I N G I N S T R U C T I O N S | VMS4200-x/5200-x MID
Fig. 59: Separation of firmware into an application part and a metrologically relevant part
Legend
1
Metrologically relevant part
2
Application
•
The firmware is separated into an
application part
and a
metrologically relevant part
.
•
The separation allows customer-specific parameters to be changed via the SOPAS
configuration software without violating the LFT conformity of the multi-dimensional
measurement system.
Fig. 60: Calibration switch for interlocking the metrological software parameters
•
The software relevant to the LFT conformity with the accompanying LFT parameters is
protected by a calibration switch.
•
The calibration switch is located on the front of the SIM2000-2 Prime controller.
•
It is interlocked by turning the calibration switch to the zero position.
Firmware
Calibration switch