![background image](http://html.mh-extra.com/html/sick/vms4200/vms4200_addendum-to-operating-instructions_1264378048.webp)
3
SYSTEM DESCRIPTION
48
8026365/V1-0/2022-03|SICK
S U P P L E M E N T A R Y O P E R A T I N G I N S T R U C T I O N S | VMS4200-x/5200-x MID
Subject to change without notice
When the VMS5200-x MID is operated on single cross belt sorters with dynamic scale
value switchover, the values for the two selected scale intervals must be described in
two separate system information labels and attached to the system indelibly.
For scale interval value 1, the
Conveyor=single belt
and
Scale value=dynamic
options
on the system information label should be marked. The dimension values with unit of
measurement (
mm
or
inch
) must be specified in indelible ink.
When specifying scale interval value 2, the
single belt/double belt: singulated
system
information label must also be used and the
dynamic
operating mode marked. The
dimension values for scale interval value 2 with unit of measurement (
mm
or
inch
) must
be specified in indelible ink.
The type labels for the two LMS4x21 LiDAR sensors as well as for the SIM2000-2 Prime
controller must be affixed to the corresponding fields of the metrology information label.
Fig. 43: Information labels for the VMS5200-x MID on single cross belt sorters with dynamic scale
value switchover and with affixed type labels
Legend
1
System information label for scale interval value 1 when working with
single cross belt sorters with dynamic scale value switchover
2
System information label for scale interval value 2
3
Metrology information label with affixed type labels
Single cross belt sorter
with dynamic scale
value switchover