![background image](http://html.mh-extra.com/html/sick/vms4200/vms4200_addendum-to-operating-instructions_1264378111.webp)
MAINTENANCE AND REPAIR
7
111
8026365/V1-0/2022-03|SICK
Subject to change without notice
S U P P L E M E N T A R Y O P E R A T I N G I N S T R U C T I O N S | VMS4200-x/5200-x MID
7.2.2
Replacing photoelectric sensor array components
WARNING
The system will no longer be verified as legal for trade after replacing a component
The photoelectric sensors of the photoelectric sensor array are part of the legal for
trade system.
Due to the replacement of a component, the VMS5200-x MID will no longer be verified
as legal for trade.
▸
After replacing a component, contact the manufacturer.
▸
The manufacturer will repair and adjust the system after the replacement of a
component.
NOTE!
In the case of MID-compliant systems, the operating entity must report the
reverification to the local weights and measures authority.
Fig. 96: Removing the photoelectric sensor of the photoelectric sensor array
▸
Unscrew the M12 plug connection from the male connector on the photoelectric
retro-reflective sensor.
▸
Loosen and remove the fixing screws.
NOTE!
Hold the photoelectric retro-reflective sensor firmly with one hand during the
procedure.
▸
Remove the defective photoelectric sensor from the mounting bracket.
▸
Screw the replacement device onto the mounting bracket.
▸
Screw the M12 plug connection onto the male connector on the photoelectric retro-
reflective sensor.
▸
Align the photoelectric sensor correctly on the reflector. The reflector must be in line
with the beam path of the photoelectric retro-reflective sensor.
Check that the photoelectric retro-reflective sensor is operating correctly.
▸
After replacing a component, contact the manufacturer.
▸
The manufacturer will arrange for the system to be reverified after the replacement of
a component.
Replacing the
component
Restoring MID
conformity